ClipperCreek HCS-40 (JuiceNet® Edition Wi-Fi Enabled) EV Charging Station
This item is back ordered and expected to ship in 2-3 weeks.
This product cannot be shipped to P.O. Boxes
ClipperCreek HCS-40, JuiceNet Edition is a Level 2 (240V) smart-grid enabled version of a leading ClipperCreek EVSE. It will automatically adjust to provide just as much power as your EV is able to accept, up to 32 amps. Some of the features of the ClipperCreek EVSE include:
- Wi-Fi enabled
- 32 amps
- 25-ft cable
At 32 amp (7.6kW), the ClipperCreek HCS-40 charges up to 10x faster.
Monitor, manage, and control your charging experience via voice commands on Amazon Alexa and Google Home.
Works with all models of electric vehicles (except for Tesla).
Convenient and Attractive Design
Don't let life pass you by. With indicator lights showing the current charging status, you will never miss a beat. (Includes an integrated cord hanger).
Wi-Fi Enabled Smartphone Control
Control time of charge and maximum charge rate, monitor power, amperage and more.
Weather resistant 25-ft cable. The unit is rugged, weatherproof and durable.
What's In The Box
What's included with your ClipperCreek HCS-40
- A 32-amp (7.6kW) 25-ft charging cable (also known as J1772 cable)
- A 1-ft input cable with 14-50P plug (also known as 'RV' plug) OR a 3-foot hardwire "pigtail"
- A wall mounted J1772 plug holster
Please see our Electric Vehicle Charger Buyer's Guide to learn more.
Plug-in vs. Hardwired
A plugged-in EVSE is a charging station that plugs into a 240V outlet (the same outlet a clothing dryer uses). Since plug-in units are portable, the only installation required is for the wall mounting station. Use the supplied screws to screw the mount into your wall surface. Once the bracket is mounted, you can slide the EVSE charger in and out easily; allowing you to use it at home and also detach it easily to take it with you.
If you don't have a 240V outlet in your desired charging location, contact a local pro and request a NEMA 14-50R outlet installation with #6AWG copper wire, and a 240V, 50A circuit. Make sure you request that the outlet is installed within one foot of where you want your EVSE station located.
A hardwired EVSE station requires a certified electrician to connect the station in a protected, NEMA-compliant enclosure. The list below details typical installation requirements for a hardwired unit:
- 2 pole, 40A breaker
- #8AWG copper wire with 2 conductors and a ground. If single conductor THHN wire is used, the ground may be #12AWG per NEC 250.122 calculations
For an outdoor installation, please add the following:
- NEMA rated outdoor junction box with gasketed cover
Recommend against GFI circuit breaker
Please, only use the pre-drilled opening on the bottom of the box for hardwire applications. We cannot honor the warranty if any other holes are added to the unit.
A fusible disconnect may be required within 6' of your EV charger device installation, please consult your local code.
Need installation tips? Want a local pro to install your charging station for you? Check out our Electric Vehicle Installation Tips and Installers page.
Wi-Fi is NOT required to use the EV charging station. However, you will need a Wi-Fi connection to use smart charging features, including:
- Access JuiceNet app via Smartphone or web from anywhere.
- Set charging schedules so that your EV avoids consuming electricity at peak times. Central Hudson offers time of use (TOU) rate schedules to their customers who are EV drivers. See if Central Hudson's Time-of-Use rates benefit you.
- Track energy usage, allowing you to view your charging history and extract accurate energy data.
- See real-time data
- Start & Stop charging remotely
- View cost savings per charging session
Your charging station will act as a standard charging unit in absence of Wi-Fi. If you set it up on Wi-Fi but then disconnect it, any schedules or limits you set when connected to the station may remain even if the station is not connected to Wi-Fi. Wi-Fi memory will be erased upon unplugging from power and will be reinstated once connected to Wi-Fi again.
If you have more than one EV, you can set up your two (or more) units to share one electrical circuit. Say, you have only 40A capacity in your panel but have two vehicles charging simultaneously. You can program your units to never exceed 40A combined draw. If only one car is charging, it gets the full 40A of current. When the second car shows up, the current gets shared 20A / 20A between the two. When one of the cars finishes charging, the remaining car ramps back up to 40A.
Charge Time Table
This Charge Time Table shows approximately how much electric range a typical EV can recover for charging stations with different capacities. Level 1 charging stations use 120 V, while Level 2 charging stations use 240 V. Charging capacity is rated in kilowatts (kW), while the vehicle's battery pack is rated in kilowatt-hours (kWh).
|Level 1 EVSE
|Level 2 EVSE
40A/10kWJuiceBox Pro 40
|Charging Time||Miles per Charge|
|Output Power||32A, 7.6kW|
|Input Voltage||208-240 VAC, single phase|
3 FT pigtail (outdoor rated 6 AWG cable with flex conduit) OR 1 FT 14-50 plug
25 FT standard length
SAE J1772 standard plug
19.7 x 8.9 x 5.3 inches (H, W, D - main enclosure)
~21 lbs fully equipped (with cables)
ETL, cETL, UL Rated
3 year manufacturer's warranty for residential usage
JuiceBox Pro 40
The JuiceBox Pro 40 is a high power, fully ruggedized, portable charger that plugs into a variety of 240V outlet types.View the JuiceBox Pro 40