JuiceBox Pro 75 is a compact, high-power and fully ruggedized Level 2 (240V) electric vehicle charging station with advanced Wi-Fi control and smart grid features. It automatically adjusts to provide just as much power as your EV is able to accept.
It is the only charging station on the market that can max out the charging rate of Tesla Model S or X with dual onboard chargers.
- Wi-Fi enabled
- 75 amps
- 24-ft cable
This is the only charging station on the market that can max out the charging rate of a Tesla Model S or X with dual onboard chargers.
Weather resistant 25-ft cable. This unit is rugged, weatherproof and durable.
Monitor, manage, and control your charger via voice commands on Amazon Alexa and Google Home.
Control time of charge and maximum charge rate, monitor power, amperage and more.
What's in the box
What's included with your JuiceBox Pro 75
A JuiceBox Pro 75, featuring:
A 75-amp 24-ft charging cable (also known as a J1772 cable) A 3-foot THHN AWG6*2 + AWG8*1 in flex conduit input whip
A hardwired EVSE station requires a certified electrician to connect the station in a protected, NEMA-compliant enclosure. In order to utilize the full 75 amp power capabilities of a JuiceBox Pro 75, you'll need to have a dedicated 100 amp circuit and a hard-wired installation. While you can also turn down the power using the smartphone app or web portal and charge at a lower rate, please verify that your home electrical panel has sufficient capacity before ordering this high-powered version of our JuiceBox product line. We otherwise recommend the standard JuiceBox Pro 40.
Other installation requirements:
- 2 pole, 100A breaker
- Junction box less than 3’ away to attach the pre-wired pigtail into
- #3AWG copper THHN wire with 2 line conductors and a #8AWG ground per NEC 250.122 calculations
For an outdoor installation, please add the following:
- A watertight/weatherproof junction box or enclosure
- Shade for the EVSE so it is not in direct sun, exceeding the 90°C mark
Recommend against GFI circuit breaker
Pre-drilled opening on the bottom of the box for hardwire applications.
A fusible disconnect may be required within 6' of your JuiceNet device installation, please consult your local code.
Need installation tips? Want a local pro to install your charging station for you? Check out our Electric Vehicle Installation Tips and Installers page.
Wi-Fi is NOT required to use the EV charging station. However, you will need a Wi-Fi connection to use smart charging features, including:
- Access JuiceNet app via Smartphone or web from anywhere.
- Set charging schedules so that your EV avoids consuming electricity at peak times. Central Hudson offers time of use (TOU) rate schedules to their customers who are EV drivers. See if Central Hudson's Time-of-Use rates benefit you.
- Track energy usage, allowing you to view your charging history and extract accurate energy data.
- See real-time data
- Start & Stop charging remotely
- View cost savings per charging session
Your charging station will act as a standard charging unit in absence of Wi-Fi. If you set it up on Wi-Fi but then disconnect it, any schedules or limits you set when connected to the station may remain even if the station is not connected to Wi-Fi. Wi-Fi memory will be erased upon unplugging from power and will be reinstated once connected to Wi-Fi again.
If you have more than one EV, you can set up your two (or more) units to share one electrical circuit. Say, you have only 40A capacity in your panel but have two vehicles charging simultaneously. You can program your units to never exceed 40A combined draw. If only one car is charging, it gets the full 40A of current. When the second car shows up, the current gets shared 20A / 20A between the two. When one of the cars finishes charging, the remaining car ramps back up to 40A.
Charge Time Table
This Charge Time Table shows approximately how much electric range a typical EV can recover for charging stations with different capacities. Level 1 charging stations use 120 V, while Level 2 charging stations use 240 V. Charging capacity is rated in kilowatts (kW), while the vehicle's battery pack is rated in kilowatt-hours (kWh).
|Level 1 EVSE
|Level 2 EVSE
40A/10kWJuiceBox Pro 40
|Charging Time||Miles per Charge|
|Output Power||75A, 18kW|
|Input Voltage||100-250 VAC, single phase|
|Input||FT pigtail; outdoor rated 6 AWg cable with flex conduit|
|Output Cable||25 FT standard length, 20 FT extension cables available
SAE J1772 standard plug
|Dimensions||10 x 6 x 3.5 inches (H, W, D - main enclosure)|
|Shipping Dimensions||16 x 16 x 8 inches (H, W, D - dual walled box)|
|Weight||~20lbs fully equipped (with cables)|
|Codes and Standards||NEMA 4 / IP66, SAE, FCC Part 15 Class B, NEC 625 compliant|
|Warranty||3 year manufacturer's warranty for residential usage|
A The JuiceBox Pro 40 is a high power, fully ruggedized, portable charger that plugs into a variety of 240V outlet types.View the JuiceBox Pro 40